Key Features - Red Rhino 5020T
General Description
This 4 tonne stone crusher is ideal for small scale demolition and construction projects - bricks, blocks, small concrete slabs, and other small stone and rock.
The stone crusher machine has straightforward controls and can be easily manoeuvered into position via its caterpillar tracks which are rubber covered to prevent damage to floor areas. Its small size and versatility makes it particularly suitable for applications where space is limited.
Output material size can be adjusted via the machine jaws and fed out from the front of the machine via an auto feed conveyor.
Accessories
Machine is just 4 months old, in excellent condition and comes complete with Kosran engine imobiliser, power screen, and Ivor William Plant Trailer
Cost - £29,000
This 4 tonne stone crusher is ideal for small scale demolition and construction projects - bricks, blocks, small concrete slabs, and other small stone and rock.
The stone crusher machine has straightforward controls and can be easily manoeuvered into position via its caterpillar tracks which are rubber covered to prevent damage to floor areas. Its small size and versatility makes it particularly suitable for applications where space is limited.
Output material size can be adjusted via the machine jaws and fed out from the front of the machine via an auto feed conveyor.
Accessories
Machine is just 4 months old, in excellent condition and comes complete with Kosran engine imobiliser, power screen, and Ivor William Plant Trailer
Cost - £29,000
Specifications
 |
|
|---|---|
| Model | 5020 T |
| Applications | Ideal for small scale demolition and construction projects where space is restricted - bricks, blocks, small concrete slabs. |
| Capacity (max) | 20 Tonnes per hour |
| Discharge Height - Hd | 1,800mm |
| Loading Height - Hl | 2,000mm |
| Length - L | 4,630mm |
| Height - H | 1,950mm |
| Width | 1,180mm |
| Weight | 2,750kg |
| Crusher Type | Jaw |
| Jaw Feed Opening Size | 200 x 500 mm |
| Adjustable Jaw |  |
| Jaw Material | Manganese Steel, Reversible |
| Engine Size | 28 KW |
| Rubber Tracks | |
| High Manoeuverability | |
| Recycled Material Output size | 5mm up to 100mm |
| Max Feed Size | 200 x 200 x 300 mm |
| Output Material feed |
Single output conveyor - front side |
| Drives | Hydraulic |
| Engine Type | 3 Cylinder Water Cooled Diesel |
| Power | 18.75kw (25hp) |
| Additions | Dust Suppression included as standard |
| Fuel Usage | 5 litres per hour approx |
Detailed Description
Machine Type
Single toggle Jaw crusher with jaw size of 500mm x 200mm.
Hydraulically adjustable jaws which produce material ranging from 100mm down to 5mm.
Material Recycling Capability
The mini crusher rock crushing equipment will crush concrete, kerbstones, granite, marble, gravestones, paving slabs, old asphalt, bricks, blocks, tiles, porcelain and flint and any other stone found in the UK. It is ideal for concrete block recycling, household brick recycling and industrial projects.
Recycled Material Output
The material output will vary according to the machine jaw setting, input material, loading equipment, loading method and familiarity of the loader. The machine can be set to produce recycled material within the range 5mm up to 100mm.
For advice on recycling your specific waste material, or specific queries, please consult the HT Services representative via the 'contact us' section on this website.
Jaws
Jaws are hydraulically adjusted by a lever, which also allows for the quick release of material.
In addition a reverse‘upwards’ action of the jaw movement is provided.
Jaws will crush hardest rock of 650 kilonewtons.
A hydraulic pressure release is fitted.
The jaw plates are 14% manganese steel and will ‘work harden’.
The life of the Jaws will vary according to the abrasive content of material – on general rubble approximately 2 years has been achieved before replacement is needed.
Reinforced Concrete and Steel
For steel and reinforced concrete it is recommended that you protect your conveyor belt and crush this material having removed the conveyor – this takes approximately 6 minutes. This is not necessary for brick and concrete block recycling.
Engine
The engine is a Yanmar 25HP water-cooled diesel. Max speed 3600rpm.
The mini crusher requires only 2600 rpm, and this creates quiet running.
A full tank of diesel will last for 10 hours. It is very economical, using only 3 litres of diesel per hour on full throttle.
The engine is fitted with a cyclonic dust filter.
Tracks and Controls
Tracks are rubber but steel tracks can be fitted. The crusher will climb a 30-degree incline and turn full circle on the spot.
Controls are hydraulic lever type, clearly and simply labeled and easily maintained. The hydraulics are standard equipment. An oil cooler is fitted to ensure longer life of hydraulic equipment and for hotter days or climates.
Conveyor and Dust Suppression
The conveyor is simple in design with few parts. There are no bed rollers to seize up or cause tracking problems. The belt and conveyor flights are moulded in one complete piece providing much strength and durability.
The speed of the belt is adjustable.
The conveyor can be removed in under 6 minutes if reinforced concrete/re-bar is present.
Dust suppression is by means of fine water spray nozzles on the conveyor, connected to a standard domestic hose fitting.
Dust suppression is fitted as standard.
Hose pipes are available from us as an additional option.
Screener
An optional conveyor mounted screener is available for hire.
This will accept various decks from 5mm mesh to 35 mm.
The screener takes only a few minutes to attach or detach. This will separate dust, topsoil and fine chippings from your crushing process.
Safety and Maintenance
There are two emergency cut-out switches, one on each side of the machine. All doors have safety cut-out switches. The machine has easy access for maintenance and cleaning.
Air, Oil and Fuel filters should be changed at least every 250 hours.
*Bearing nipples should be greased 4 shots every 10 hours.
Loading the Rock Crushing Equipment
Maximum productivity is achieved by correct loading of the rock crushing equipment.
The most effective method is with a 3 ton excavator fitted with an 18” bucket .
A constant and regular feed of material, loaded from the rear of the machine and from a height which allows continual observation of the jaws, whilst utilising the full length of the hopper is best.
An operator should become familiar within a short space of time. The hopper and jaw aperture should not be swamped.
For concrete block recycling and brick recycling the rock crushing equipment can be manually loaded.
Safety Standards
CE Marked.
Complies with all European Emission and Safety Regulations.